5 Gloves for Working in a Freezer: Which Fits Best? (2026)
As an Amazon Associate I earn from qualifying purchases. When you click a product link on Restaurant Week Hawaii and buy something on Amazon, Amazon pays us a small commission; the price you pay is the same. Learn more.
Pick gloves for freezer work by cold rating first, then moisture, then the hazards in your hands.
For the best gloves for working in a freezer, weigh three things in order. First, the stated temperature range: a glove that only says warm or winter tells you little about a walk-in at deep cold.
Second, moisture. Frost, condensation and wet cartons soak through some fabrics fast, so check whether the listing says waterproof, water resistant or neither.
Third, what your hands touch: blades, box edges, slick packaging. That sets the grip and cut protection you need. Last comes closure and fit, which decides whether you can still pick up small items.
Our top picks for Gloves For Working In A Freezer
Ergodyne Proflex 850 comes first because its listing states a temperature rating of -5°F to -20°F, the lowest range among these picks. If you handle wet product or blades, Schwer FreezeGuard-X adds a cut-resistance claim, and OriStout is the pick when waterproofing matters most at a lower price band.
Choose the right Gloves For Working In A Freezer
Run every pair through this checklist
- Stated temperature range. A listed figure beats a vague warm claim; no figure means you are guessing.
- Moisture rating. Waterproof, water resistant and not water resistant are three different outcomes in a damp room.
- Cut resistance. Needed only if you handle blades or sharp edges; check the listed level.
- Grip coating. Silicone, nitrile or latex palms matter when packaging is slick or frosted.
- Closure. Hook and loop seals the cuff; pull-on is quicker but lets cold air in.
- Dexterity. Thin insulation keeps finger control; loose fit costs some.
- Size range. Other sizes exist for most picks, so confirm yours before ordering.
Where the listings fall short
Several listings skip hand orientation, material or waterproof status. Where a fact is missing, treat it as unknown rather than a yes.
Fit and feel cannot be judged from a spec sheet. A glove rated cold enough can still be too bulky for your task.
Which gloves for working in a freezer fits which buyer
- Walk-in freezer shifts below zero Rated -5°F to -20°F; insulated; reinforced thumb Ergodyne ProFlex 850 insulated freezer gloves
- Cutting or handling sharp packaging Listed ANSI A9 cut resistance with nitrile foam grip Schwer FreezeGuard-X cut-resistant freezer gloves
- Wet work, ice melt, washdowns Listed waterproof; rated -4°F; latex palm coating OriStout waterproof winter work gloves
- Moderate cold with cut protection Fleece lined to -5°C; ANSI A3 cut resistance Superior Glove fleece-lined winter work gloves
- Two pairs for rotating shifts Pack of 2; waterproof; rated below 32°F LOCCEF thermal freezer gloves, 2 pairs
Compare each Gloves For Working In A Freezer pick
1. Ergodyne ProFlex 850 insulated freezer gloves
1 · Best Overall
Verdict: For cold-storage staff who need a stated freezer rating: -5°F to -20°F, insulated, silicone grip, reinforced thumb saddles.
- not stated Item Weight
- Nylon Material
- Not Water Resistant Item weight not stated. Material not stated. Not Water Resistant. Closure type not stated.
- Hook and Loop Closure Type
Best for Dry cold-storage shifts at deep-freeze temperatures
Skip it if You work in wet conditions; look at OriStout instead.
| Pros | Cons |
|---|---|
| Stated range of -5°F to -20°F, the only freezer-specific rating here | Listing says not water resistant |
| Silicone palm pattern and reinforced thumb saddles for grip | No cut rating stated |
| Item weight not stated |
Against the next pick: LOCCEF lists no cut rating, while Superior Glove lists ANSI A3. Beats Schwer on a stated freezer range, but Schwer adds a cut rating Ergodyne does not list.
Also sold as: XX-Large / Black, X-Small / Black, Medium / Black, XX-Small / Black.
This is the only listing built around the freezer job itself. It names the product type as insulated freezer gloves and gives a temperature range, which no other pick does as plainly.
The trade-off is moisture. The listing states the gloves are not water resistant, so frost melt, condensation and wet cartons will soak through. Dry cold storage suits them; washdowns do not.
Neoprene cuffs and lightweight insulation are described as keeping dexterity for all-day use. The listing gives no cut rating and no item weight, so blade work needs a different pair. Other sizes exist if Large does not fit.
Full listing specifications
Specifications
2. Schwer FreezeGuard-X cut-resistant freezer gloves
2 · Best for Cut Protection
Verdict: For freezer staff who also handle blades or sharp edges: listed ANSI A9 cut resistance with an acrylic terry liner.
- 0.1 kg Item Weight
- HPPE, Polyester, Spandex… Material
- Water Repellent Waterproof Water Resistance Level, Pull On Closure Type.
- Hook and Loop Closure Type
Best for Meat, packaging or box-cutter work in cold rooms
Skip it if You need a stated freezer rating; choose Ergodyne.
| Pros | Cons |
|---|---|
| Listed ANSI A9 cut resistance, higher than Superior Glove's A3 | No temperature rating stated |
| Nitrile foam coating for wet and greasy grip | Water repellent only, not waterproof |
| Hook-and-loop closure with reinforced thumb | Loose fit may cost dexterity |
Against the next pick: Beats OriStout on cut resistance, but OriStout is listed waterproof and Schwer is not.
Not stated on the listing: hand orientation. Also sold as: 12 pairs / Winter Black A6 / Large, 1 pair / Yellow / XX-Large, 2 pairs / Winter Orange / Medium, 120 pairs / Black / Large.
Cut protection is the reason to pick this. The listing names an A9 level, HPPE and metal-wire yarn, and a nitrile foam coating for wet and greasy grip.
The catch is warmth. The listing calls it cold resistant and suggests refrigerated warehouses, but gives no temperature rating. Compare that with Ergodyne, which states a range.
Water repellent, not waterproof. Fit is listed as loose, and the closure is hook and loop. The listing also claims touchscreen use and PFAS-free material. Hand orientation is not stated.
Full listing specifications
Specifications
3. OriStout waterproof winter work gloves
3 · Best for Wet Work
Verdict: For wet cold-room jobs: listed waterproof with latex palm coating and a -4°F rating, in a lower-priced band.
- 3.84 ounces Item Weight
- Polyester Material
- Waterproof Water Resistant Water Resistance Level, Pull On Closure Type.
- Pull On Closure Type
Best for Wet, moderately cold storage work
Skip it if You need blade protection; see Schwer.
| Pros | Cons |
|---|---|
| Listed waterproof, which Ergodyne is not | Rated only to -4°F |
| Latex palm coating for slippery grip | Hand orientation listed as Right |
| Lower-priced in this set | No cut rating stated |
Against the next pick: Waterproof where LOCCEF is water resistant by name, but LOCCEF ships two pairs.
Also sold as: 2 Pairs / X-Large / Orange, 1 Pair / X-Large / Red, 2 Pairs / Small / Gray, 2 Pairs / X-Large / Gray.
Waterproofing is the deciding fact. The listing states waterproof, a latex coating and a layered build for refrigerated warehouses.
It does not mention freezers by name, and the -4°F rating is shallower than Ergodyne’s lower figure. Only a Right orientation is listed, so confirm how it fits both hands.
A polyester and acrylic terry liner adds warmth, and graphene in the palm dip supports touchscreens. No cut rating is stated. Other sizes and multi-pair packs exist.
Full listing specifications
Specifications
4. LOCCEF thermal freezer gloves, 2 pairs
4 · Best Two-Pair Pack
Verdict: For crews that rotate gloves: a pack of two, fleece-style insulation, rated below 32°F and listed for cold storage.
- 0.22 kg Item Weight
- Polyester, Acrylic… Material
- Water Resistant Water Resistant Water Resistance Level, Pull On Closure Type.
- Pull On Closure Type
Best for Shared crews needing spare pairs
Skip it if You need a deep-freeze rating; pick Ergodyne.
| Pros | Cons |
|---|---|
| Two pairs in one pack | Rating only below 32°F |
| Listed for cold storage activity | Waterproof and water resistant labels conflict |
| Ambidextrous |
Against the next pick: Heavier than Superior Glove's listed weight issue aside, it is warmer-rated on paper only loosely and lacks A3 cut protection.
Not stated on the listing: fit type. Also sold as: X-Large, XX-Large, Large (Pack of 2), Small (Pack of 2).
You get two pairs, so one can dry while you wear the other. That is the practical draw.
The temperature rating is only below 32°F, which is a freezing point, not a freezer figure. Ergodyne states far lower. The listing calls it waterproof in specs yet water resistant in level, so treat wet claims cautiously.
Wing thumb, pull-on, sleeveless cuff. A puncture rating is claimed in the description. The listing gives the weight as 0.22 kg.
Full listing specifications
Specifications
5. Superior Glove fleece-lined winter work gloves
5 · Best Light Cold Gloves
Verdict: For cooler rooms: fleece lining to -5°C (23°F) and ANSI A3 cut resistance with a palm coating that stays flexible.
- unclear on listing Item Weight
- Nylon Material
- Water Resistant Water Resistance Level
- Pull On Closure Type
Best for Chilled rooms with light cutting
Skip it if Your freezer runs below zero; choose Ergodyne.
| Pros | Cons |
|---|---|
| Listed ANSI A3 cut resistance | Only rated to 23°F |
| Palm coating stays flexible in cold | Not waterproof |
| Ambidextrous, regular fit | Weight in listing is an error |
Against the next pick: Offers A3 cut protection where LOCCEF lists none, but LOCCEF's pack has two pairs.
Also sold as: Small (Pack of 1) / Red/Black, Large (Pack of 1) / Red/Black, X-Large (Pack of 1) / Red/Black.
That suits coolers and chilled rooms, not a true freezer.
Its strengths are A3 cut resistance and a palm coating said not to stiffen in cold. Water resistant, not waterproof.
The listed weight of 9.07 g is a listing error, so ignore it. Regular fit, pull-on, ambidextrous.
Full listing specifications
Specifications
Know this before you buy Gloves For Working In A Freezer
What each listing states
- Schwer: states ANSI A9 cut resistance, level 2 puncture prevention and PFAS free; water repellent.
- OriStout: states waterproof and a latex coating; mentions sustainability features without naming a certifier.
- LOCCEF: states an ANSI 2 puncture rating and recycled content; the waterproof field and water resistance level disagree.
- Superior Glove: states ANSI A3 cut resistance and water resistant.
Anything not listed above is not stated. Do not assume a mark the listing does not name.
The competition
- SIMARI touchscreen winter gloves Not what the search asks for Ski-style liner gloves; the listing gives no temperature rating or water resistance and does not mention freezers.
- Bruvoalon 3M Thinsulate winter gloves Not what the search asks for Built for running and commuting, and the listing says it is not for the coldest conditions.
- HANDLANDY Thinsulate waterproof gloves Listing states too little and the listing gives no temperature rating or cut rating.
How this guide was researched
None of these gloves were handled. The ranking comes from reading each manufacturer’s listing and comparing temperature ratings, water claims, cut levels, closures and materials side by side.
Listings cannot tell you fit, feel, warmth over a full shift or how long the coating lasts. Where a listing contains an obvious error, such as one item weight, it is flagged and not used.
8 listings were compared on item weight, material, water resistance level and closure type. 3 were set aside (2 not what the search asks for and 1 listing states too little). No product was bought or physically handled: every figure is the manufacturer's listing value, and 1 listed value that looked wrong is flagged in the text. Produced by Restaurant Operations Desk. Editorial responsibility: restaurantweekhawaii.com.
Your buying questions
Which glove suits a walk-in freezer below zero?
Ergodyne ProFlex 850 is the one to start with. Its listing states -5°F to -20°F, the only freezer-specific range here. OriStout stops at -4°F and Superior Glove at 23°F, so neither is a match for deep cold.
Is Schwer worth it over Ergodyne?
Only if you cut things. Schwer lists ANSI A9 cut resistance and Ergodyne lists none. Ergodyne states a freezer range and Schwer does not, so choose by whether blades or cold is the bigger risk.
Which pick handles wet conditions?
OriStout is listed as waterproof with a latex palm coating. Ergodyne’s listing says not water resistant, and Superior Glove is water resistant only. For frost melt and washdowns, OriStout fits better.
Is the LOCCEF two-pair pack a good idea?
It helps if gloves get damp and need drying between shifts.
Can ski or running gloves work in a freezer?
The listings are not encouraging. SIMARI is a ski-liner style with no stated rating, and Bruvoalon says it is not for the coldest conditions. The five picks here are better matches for freezer work.
The right Gloves For Working In A Freezer for you
Choose Ergodyne for dry deep-freeze shifts, Schwer when blades are involved, and OriStout when things get wet. LOCCEF and Superior Glove fit lighter cold jobs.
Editor’s note: this guide was first published in 2026 and reflects the product pages as they stood then.
What changed
- Published guide
- Guide drafted
