Restaurant WeekHawaii

Best Drop In Kitchen Sinks in 2026: 5 Top-Mount Workstations

As an Amazon Associate I earn from qualifying purchases. When you click a product link on Restaurant Week Hawaii and buy something on Amazon, Amazon pays us a small commission; the price you pay is the same. Learn more.

Before you shop for the best drop in kitchen sink, measure your cabinet, then decide on bowls, then on steel thickness.

Cabinet width first. Each sink here states a minimum base or a footprint. A 33-inch sink can need a 36-inch cabinet; another 33-inch model needs only 30. Get this wrong and nothing else matters.

Bowl layout second. One wide bowl takes sheet pans. Two equal bowls let you soak and rinse at once. Pick by how you wash.

Gauge third. Lower gauge means thicker steel. The picks run from 16 to 20 gauge, and the thicker sinks weigh more and cost more.

What’s in the box last. Some ship with a cutting board, colander and rack; one ships as the sink alone. Count that before you compare prices, because buying a grid and strainer later adds up.

Jump to a pick

The Lordear 33-inch workstation sink comes first: 16-gauge T304 steel, a full accessory kit and a mid-priced spot below the VOKIM. Pick the VOKIM if you want a black finish with the same 33 by 22 footprint. Pick the Elkay Dayton for two equal bowls on a 30-inch minimum cabinet, or the HOTIS for a small 24 by 18 opening.

Match the pick to your situation

Drop In Kitchen Sink picks that deliver

1. Lordear 33-inch workstation: the full kit for less

Lordear 33 Inch Drop In Kitchen Sink Workstation All In One SUS304 16 Gauge Stainless Steel 33x22 Drop In Sinks Single Bowl Handmade Above the Counter1 · Best Overall

Verdict: For a standard 36-inch sink base: 16-gauge T304 steel and a sliding cutting board, colander and roll-up rack at a mid-price.

  • 30 pounds Item Weight
  • 22"D x 33"W x 10"H Dimensions
  • Brushed Finish Types
  • Grid Drain Type

Best for Replacing a top-mount sink in a standard 36-inch base

Skip it if Skip it if your base cabinet is under 36 inches; the Elkay Dayton fits smaller bases.

3 pros2 cons
  • 16-gauge T304 steel, same as the VOKIM
  • Cutting board, colander and roll-up rack included
  • 30 lb, 8 lb lighter than the VOKIM
  • Needs a 36-inch minimum cabinet base
  • One faucet hole, against two on the VOKIM

Against the next pick: It matches the VOKIM's 33 x 22 x 10 size at 30 lb against 38 lb, but the VOKIM has two holes and a black finish.

Also sold as: Gold / 33x22x10 Inch, Black / 36×22 Inch, Stainless Steel / 25x22x12 Inch, Black (Waterfall) / 33×22 Inch-seperated knob.

This is the sink most kitchens need. The 33 by 22 footprint and 10-inch depth match the VOKIM, the steel gauge is the same 16, and the box carries a cutting board, deep colander, roll-up rack, bottom grid, drain and clips. The catch is the cabinet: Lordear says it needs a 36-inch base.

Front and back ledges act as a track for the board. Handy, though only if you will actually chop over the sink.

At 30 lb it is lighter than the VOKIM, which helps when one person sets it into the cutout. The anti-condensation coating and rubber padding are standard fare in this set; the HOTIS and VOKIM list similar measures, so do not pay extra for them. The listing does not state the faucet hole count.

Full listing specifications
Number of Packs: 1Included Components: A 33" drop in kitchen sink, A deep colander and A roll-up rack, A stainless steel bottom grids, A thick cutting board, Drain assembly +clips+installation+templateItem Type Name: 33 Drop In Kitchen Sink WorkstationSize: 33x22 InchItem Dimensions D x W x H: 22"D x 33"W x 10"HItem Weight: 30 poundsBase Width: 36 inchesColor: Stainless SteelStyle: 33"x22"x10"Shape: Rectangular

2. VOKIM 33-inch black: the color upgrade

33 Inch Black Drop In Kitchen Sink - VOKIM33x22Inch Top Mount Sink2

Verdict: For buyers set on black: same 33 by 22 workstation layout as the Lordear, with a PVD-coated finish and two faucet holes.

  • 38 pounds Item Weight
  • 22"D x 33"W x 10"H Dimensions
  • Brushed Finish Types
  • Grid Drain Type

Best for Black-fixture kitchens wanting a workstation sink

Skip it if Skip it if stainless suits you; the Lordear costs less with the same size.

3 pros2 cons
  • Two faucet holes for a sprayer or soap pump
  • Rear-set drain frees bowl floor
  • Black PVD-coated 16-gauge steel
  • Higher-priced in this set than the Lordear
  • 38 lb, the heaviest pick

Against the next pick: It beats the Elkay Dayton on gauge and accessories, but at 38 lb it is far heavier than the Dayton's 6.5 lb.

Also sold as: 26"L x 19"W x 10"D / Black(26*19 ), 28"L x 22"W x 10"D / Black, 33"L x 22"W x 10"D / Stainless Steel, 30" x 22"x 10"(( R10 Corner ) / Stainless Steel.

The extra money here buys color. Two faucet holes and a black nano PVD finish are the differences the listings show over the Lordear; the gauge, footprint and accessory list are close.

It weighs 38 lb, the heaviest in this set. Plan for two people at install.

VOKIM lists a 31-inch base width and an interior of 31 by 18 by 10, with a rear-set drain and four grooves on a sloped floor, which leaves more flat space in front for stacking pots. The included roll-up rack, colander and cutting board match the Lordear kit. If stainless is fine with you, the cheaper Lordear does the same job; the listing’s other sizes run down to 25 inches if 33 is too wide.

Full listing specifications
Number of Packs: 1Installation Type: Drop InDrain Type: GridHole Count: 2Size: 33"L x 22"W x 10"DItem Dimensions D x W x H: 22"D x 33"W x 10"HItem Weight: 38 poundsBase Width: 31 inchesColor: BlackStyle: Drop In Kitchen Sink Workstation Black

3. Elkay Dayton double bowl: two sinks, small cabinet

Elkay DSE233221 Dayton Equal Double Bowl Drop-in Stainless Steel Sink3 · Best Double Bowl

Verdict: For wash-and-rinse households with a smaller base: two equal bowls that need only a 30-inch minimum cabinet.

  • 6.5 pounds Item Weight
  • 33"D x 22"W x 8.06"H Dimensions
  • 1 Faucet Hole Finish Types
  • Pop-Up Drain Type

Best for Kitchens that wash and rinse in separate bowls

Skip it if Skip it if you wash big stockpots; one large bowl like the Lordear suits that better.

3 pros2 cons
  • Two equal bowls
  • 30-inch minimum cabinet
  • U-channel clips speed install
  • 20-gauge steel, thinner than the Lordear's 16
  • Sink only, no grid or strainer; listing states no warranty

Against the next pick: It holds two bowls the HOTIS lacks, but the HOTIS uses thicker 16-gauge steel in a 24-inch width.

Also sold as: 33 x 21 / 2 Faucet Holes (Middle Right) / Sink Only, 33 x 19 / 4 Faucet Holes / Sink Only, 33 x 22 / 2 Faucet Holes / Sink Only, 33 x 22 / 3 Faucet Holes / Sink Only.

Two equal bowls, so you can soak in one and rinse in the other. It needs just a 30-inch cabinet, the smallest minimum stated among the 33-inch sinks here.

The trade-off is steel. This is 20 gauge, thinner than the 16 gauge on the Lordear and VOKIM, and at 6.5 lb it is the lightest sink in the set. Elkay lists sound-deadening pads.

Nothing extra comes in the box: no grid, no strainer stated. The listing also has no warranty. The U-channel clips go in before install, which cuts time under the sink. The bowl height of 8.06 in is the shallowest here. Other faucet-hole counts are sold.

Full listing specifications
Manufacturer Warranty Description: No WarrantyIncluded Components: Product OnlyItem Type Name: Kitchen SinkSize: 33 x 22Item Dimensions D x W x H: 33"D x 22"W x 8.06"HItem Weight: 6.5 poundsColor: EliteSatinStyle: 1 Faucet HoleShape: RectangularMaterial Type: Stainless Steel

4. HOTIS 24 x 18: small and simple

HOTIS 24 x 18 Inch Drop In Kitchen Sink, Overmount 304 Stainless Steel RV Laundry Utility Sink, Topmount Extra-thick 16 Gauge Brushed Nickel Single Bowl Sink with Dish Grid & Drain4 · Best Compact

Verdict: For RVs, laundry rooms and small kitchens: a 24 by 18 top-mount bowl, 9 inches deep, lower-priced in this set.

  • not stated Item Weight
  • 18"D x 24"W x 9"H Dimensions
  • Brushed Finish Types
  • Grid Drain Type

Best for RVs, laundry rooms and compact kitchens

Skip it if Skip it if you need a main kitchen sink; the Lordear has room for stockpots.

3 pros2 cons
  • 24-inch width fits small bases
  • Two faucet holes
  • Basket drain and tailpiece included
  • Gauge conflicts within the listing
  • Weight is not listed

Against the next pick: It is wider than the Beleeb at 24 against 20 inches, but the Beleeb lists its 13 lb weight and an embossed scratch-hiding finish.

Also sold as: Black / 18×18 inch sink, Brushed Nickel / 15×20 inch sink, Black / 15×17 inch sink, Black / 15×15 inch sink.

A small sink at a small price. The bowl is 22 by 14 inside.

One listing error: the title says 16 gauge while the description says 18 gauge. Treat the gauge as unknown until the brand confirms it.

You get a dish grid, basket drain and tailpiece, plus anti-condensation coating and 3mm pads. The listing does not give a weight. Smaller sizes and a black version are sold too. For a main kitchen sink, the Lordear holds far more.

Full listing specifications
Number of Packs: 1Included Components: Sink with Dish Grid & DrainItem Type Name: kitchen sinkSize: 24x18 inch sinkItem Dimensions D x W x H: 18"D x 24"W x 9"HColor: Brushed NickelStyle: 24x18 inch Drop in SinkShape: basinMaterial Type: Stainless SteelFinish Types: Brushed

5. Beleeb 20 x 16 embossed: a bar or prep sink

Drop-in Kitchen Sink 20"x16" Single Bowl: 3D Micro-pebble Embossed5 · Best Prep Sink

Verdict: For a second prep or bar sink: the narrowest pick, with an embossed finish meant to hide scratches.

  • 13 pounds Item Weight
  • 16"D x 20"W x 9"H Dimensions
  • Embossed Finish Types
  • Grid Drain Type

Best for Island prep or bar sinks

Skip it if Skip it if this is your only sink; the HOTIS or Lordear holds more.

3 pros2 cons
  • Embossed finish hides scratches
  • 20-inch width, the narrowest here
  • Lower-priced in this set
  • 18-gauge steel, thinner than the Lordear
  • Faucet hole count not stated

Against the next pick: It is easier to handle than the HOTIS at 13 lb listed, but its 20-inch width gives less bowl than the HOTIS's 24.

Not stated on the listing: hole count. Also sold as: 28" x 18", 33" x 22", 25" x 22".

The micro-pebble texture is the reason to buy it. Beleeb says it hides small nicks; plain brushed steel shows them.

It is 18-gauge steel and the cutout is only 18 by 12. That is too small for a primary sink, and the listing does not state the faucet hole count.

The bowl is 9 inches deep and the sink weighs 13 lb. Grid and strainer are included. Larger 25, 28 and 33-inch versions are sold if you like the finish but need room.

Full listing specifications
Number of Packs: 1Included Components: Sink Body, bottom grid, drain assembly with strainerItem Highlight: 304 Stainless Steel Sink, 9" Deep, Top Mount, Scratch-Resistant Embossed Surface, for High-frequency CookingSize: 20" x 16"Item Dimensions D x W x H: 16"D x 20"W x 9"HItem Weight: 13 poundsColor: 3D EmbossedStyle: ModernShape: RectangularMaterial Type: Stainless Steel

Which pick is best for what

The table lists each pick’s best use, its item weight, its dimensions and where it sits on price in this set. The HOTIS does not list a weight.

Dimensions matter most. Check width against your cabinet before anything else; weight mostly tells you whether install is a one-person job.

#ProductItem WeightDimensionsFinish Types
130 pounds22"D x 33"W x 10"HBrushedCheck price
238 pounds22"D x 33"W x 10"HBrushedCheck price
36.5 pounds33"D x 22"W x 8.06"H1 Faucet HoleCheck price
4not stated18"D x 24"W x 9"HBrushedCheck price
513 pounds16"D x 20"W x 9"HEmbossedCheck price

A short checklist before you order

  • Minimum cabinet size. The Lordear needs 36 inches, the Elkay Dayton 30; this decides what fits.
  • Cutout dimensions. A drop-in rim covers rough edges, but the hole must match the template supplied.
  • Gauge. 16 gauge is thicker than 18 or 20; thinner steel is lighter and cheaper.
  • Bowl count. One large bowl for big pans, two equal bowls for soak-and-rinse washing.
  • Faucet holes. Two holes allow a sprayer or soap pump without drilling the counter.
  • Included parts. A grid, strainer and clips save a second shopping trip.
  • Drain size. A 3-1/2 inch opening, as on the Lordear and VOKIM, suits common disposals.

Material claims each listing makes

None of the five picks names a plumbing certification or certifier. Here is what each states, in its own terms. See also: best kitchen sink strainer.

  • Lordear: states 16-gauge T304 stainless steel. Certification not stated.
  • VOKIM: states T-304 grade, 16-gauge steel with a nano PVD outer coating. Certification not stated.
  • Elkay Dayton: states 20-gauge, 300 Series stainless steel and domestic manufacturing. Certification not stated; warranty listed as none.
  • HOTIS: states T-304 stainless steel; the gauge is given as both 16 and 18 in one listing. Certification not stated.
  • Beleeb: states 18-gauge T304 stainless steel. Certification not stated.

If code compliance matters for your install, ask the brand directly before buying.

What didn't make the list

  • KRAUS Standart PRO 32-inch Not what the search asks for An undermount sink with no drop-in mounting deck, so it does not suit a top-mount cutout.
  • KRAUS Kore 32-inch workstation Not what the search asks for This version is undermount; the listing notes a drop-in design is sold separately.
  • Vivrhintty 30-inch workstation sink Beaten on a listed spec Its listed installation type is undermount and the bundled drain may need an adapter for US basket strainers, so the Lordear is the safer drop-in buy.

How we keep this honest

We handled none of these sinks. The ranking comes from setting the brands’ own listing specs side by side: installation type, footprint, minimum cabinet, gauge, bowl count, faucet holes, weight and included parts. Undermount-only models were moved out because they do not suit a top-mount cutout.

Specs cannot show how a finish ages, how loud a bowl is under running water or how true a cutout template is. Confirm your cabinet and counter measurements yourself.

8 listings were compared on item weight, dimensions, finish types and drain type. 3 were set aside (2 not what the search asks for and 1 beaten on a listed spec). No product was bought or physically handled: every figure is the manufacturer's listing value. Produced by Refrigeration & Sanitation Desk. Editorial responsibility: restaurantweekhawaii.com.

Answers before you buy

Is the VOKIM worth it over the Lordear?

Only if you want black or a second faucet hole. Both are 33 by 22 by 10, both use 16-gauge T304 steel, and both ship with a cutting board, colander and roll-up rack. The VOKIM is higher-priced and 8 lb heavier. In stainless, the Lordear is enough.

Which sink fits a 30-inch base cabinet?

The Elkay Dayton states a 30-inch minimum cabinet, the only 33-inch sink here that does. The Lordear asks for 36 inches. For anything narrower, the HOTIS at 24 inches wide or the Beleeb at 20 inches are the options. Measure the cabinet interior before you order.

Single bowl or double bowl?

One bowl suits big pans: the Lordear’s 33 by 22 basin fits sheet pans and stockpots. Two bowls suit soak-and-rinse washing, which is what the Elkay Dayton’s equal bowls are for. The Dayton uses thinner 20-gauge steel, so the trade is bowl layout against thickness.

Is the HOTIS big enough for a main kitchen sink?

For a small apartment or RV, maybe. Its interior is 22 by 14 with a 9-inch depth, which handles plates and small pots. If the cabinet allows, the Lordear holds far more for a mid-priced step up.

Do I need a workstation ledge?

Only if you prep over the sink. The Lordear and VOKIM both have front and back ledges with a sliding cutting board, which frees counter space. If you just wash dishes, the Elkay Dayton or HOTIS skip that cost and do the basic job.

The right Drop In Kitchen Sink for you

For a standard 36-inch base, the Lordear is enough: 16-gauge steel, one big bowl and the workstation kit at a mid-price. The VOKIM’s extra money buys black and a second hole, nothing more. If you wash in two stages, the Elkay Dayton wins. And if your counter is stone and you are replacing it anyway, consider whether a top-mount rim is what you want at all before buying any of these.

What changed
  • Published guide
  • Guide drafted

Read the full method.