Restaurant WeekHawaii

Which Cut Resistant Work Gloves Should You Buy in 2026? 7 Ranked

As an Amazon Associate I earn from qualifying purchases. When you click a product link on Restaurant Week Hawaii and buy something on Amazon, Amazon pays us a small commission; the price you pay is the same. Learn more.

Start with how sharp your work really is, then weigh grip in grease, then how many pairs you need in rotation.

Cut level comes first. The listings here span ANSI A1 to A9. Match the rating to your sharpest task, not your average one.

Palm coating second. Sandy nitrile is pitched at oily, wet grip. PU trades some of that for a thinner feel.

Thickness and gauge third. Thinner liners give you fingertip control for small parts; thicker gloves give bulk you will notice.

Pack size last. One pair suits a single cook or fabricator. A dozen suits a crew that washes and rotates. The best cut resistant work gloves for you sit where those four meet, and the checklist below grades every pick against them in that order.

Our top picks for Cut Resistant Work Gloves

The Schwer ProGuard comes first because its listing states ANSI A9, the top cut level here, with a sandy nitrile palm and reinforced thumb. If you need a dozen pairs for a crew at a mid-level rating, the Schwer A7 12-pack wins. For fine, fiddly work where feel matters more than protection, the Schwer Air-Skin's 18-gauge liner is the better choice.

Choose the right Cut Resistant Work Gloves

Grade every glove against this checklist, in this order.

  • Stated ANSI cut level. The single most important number; picks here run from A1 to A9.
  • Stated cutting load. Two Schwer listings quote grams of load, which helps separate A6 from A7.
  • Palm coating. Sandy nitrile for oil and water; PU for a thinner feel.
  • Liner gauge or thickness. Higher gauge and lower thickness mean better dexterity, usually less bulk.
  • Reinforcement. Reinforcement. Some listings state a reinforced thumb crotch.
  • Pack size. Twelve pairs suit rotation; one or two suit personal use.
  • Care instructions. Washable gloves stay in service longer; check stated water temperatures.
  • Material claims. PFAS-free, fiberglass-free or latex-free matter for sensitive skin.

Which pick wins each criterion

  • Cut level: Schwer ProGuard, A9.
  • Cutting load: Schwer A7, over 4000 grams stated.
  • Greasy grip: Schwer A6 and A7, sandy nitrile.
  • Dexterity: Schwer Air-Skin, 18-gauge.
  • Weight: Klein Tools A1, 0.21 lb for two pairs.
  • Bulk budget: COOLJOB, 12 or 120 pairs.

Overall call: the ProGuard for one person facing real blades, the A7 pack for crews.

Pick by situation

Compare each Cut Resistant Work Gloves pick

1. Schwer ProGuard: the most protection per pair

Schwer ProGuard High Level Cut Resistant Work Gloves for Extreme Protection, ANSI A9 Cut Gloves with Reinforced Thumb, Non Slip, Breathable, Durable, Touch-screen, Black 1 Pair(L 33261 · Best Overall

Verdict: For anyone handling glass, blades or metal edges: the ANSI A9 rating is the highest any listing in this set states.

  • Nitrile Palm Material
  • Coated Palm Palm Style
  • One Size Fits All Fit Type
  • False Is Waterproof

Best for Single users facing high-risk edges: glass, sheet metal, blades.

Skip it if Skip it if you need multiple pairs for staff; the Schwer A7 12-pack fits that better.

Pros 4
  • ANSI A9, highest stated level in this set
  • Sandy nitrile palm for wet or greasy grip
  • The palm has a sandy nitrile coating and the thumb crotch is reinforced.
  • Touchscreen compatible, machine washable
Cons 3
  • Sold as a single pair, unlike the 12-pack picks
  • Thickness and weight not stated
  • 13-gauge knit is coarser than the Air-Skin's 18-gauge

Against the next pick: It has a sandy nitrile palm where the Schwer CR3088 has PU, and it states a 0.08 in thickness that the CR3088 listing does not. It outranks the Schwer A7 on cut level (A9 vs A7) but loses on pack size, one pair against 12.

Also sold as: 12 pairs / Winter Black A6 / Large, 1 pair / Yellow / XX-Large, 2 pairs / Winter Orange / Medium, 120 pairs / Black / Large.

A9 is the headline. The trade-off is quantity: this listing sells one pair, while four other picks come as 12-packs, so a crew pays per pair.

The sandy nitrile palm and reinforced thumb crotch target the two spots that wear out first on a cut glove. Schwer says the 13-gauge knit keeps it breathable, and the liner adds metal wire to HPPE, polyester and spandex. Metal wire raises protection but can make a glove stiffer than the Air-Skin’s 18-gauge build; the listing does not compare the two directly.

The listing does not state a fit type, so treat the size chart as the guide. Treat the size chart as the guide.

Full listing specifications
Warranty Description
LIMITED LIFETIME WARRANTY - If you’re not happy with your Schwer product, please contact us within 30 days of receiving it at sales@schwergloves.com to return it for free for a replacement product. Each Schwer product is warranted to be free of defects in material and workmanship for as long as the
Material
HPPE, Polyester, Spandex, Metal wire
Material Type Free
Alcohol Free
Material Features
Cut Resistant, Abrasion PFAS Free
Glove Construction
Dipped
Stitching Type
Knitted
Glove Liner Material
HPPE/Polyester/Spandex
Palm Material
Nitrile
Palm Style
Coated Palm
Apparel Fabric Stretch
Medium Stretch

2. Schwer A7 12-pack: high protection for a crew

Schwer 12 Pairs A7 Cut Resistant Work Gloves, Touchscreen, CR3027, L2 · Best for Teams

Verdict: For crews handling sharp stock daily: 12 pairs rated ANSI A7, with the brand stating over 4000 grams of cutting load.

  • Nitrile Palm Material
  • coated with added grip Palm Style
  • not stated Fit Type
  • False Is Waterproof

Best for Kitchens and shops equipping several people at medium-to-high cut risk.

Skip it if Skip it if you work alone and want the top rating; the ProGuard is a single A9 pair.

Pros 3
  • ANSI A7 across 12 pairs
  • Sandy nitrile palm
  • Ten-finger touchscreen
Cons 3
  • Fit type and fabric type not stated
  • Higher-priced in this set
  • Grip may fade with long use, per the brand

Against the next pick: It is mid-priced where the Air-Skin is higher-priced, but the Air-Skin's 18-gauge liner targets finer work. It beats the Schwer A6 on stated cutting load, over 4000 g against over 3000 g, but does not state thickness while the A6 lists 0.08 in.

Not stated on the listing: fabric type, closure type. Also sold as: 2 Pairs / Small / Army Green, 120 Pairs / Large / Yellow, 120 Pairs / Medium / Yellow, 60 Pairs / Large / Grey.

A7 is one step below the ProGuard, and you get a dozen pairs. That trade suits a kitchen or shop where gloves get lost, washed and rotated.

The palm is sandy nitrile, the same grip style as the ProGuard. Schwer even admits grip may diminish with long-term use. Touchscreen works on all ten fingers.

What the listing leaves out

Fit type and fabric type are missing, and so is thickness, which the Air-Skin and A6 both state. Construction is listed as cut and sewn plus coated, unlike the dipped knits elsewhere; the listing does not explain what that means for the seams.

Full listing specifications
Size
Large
Color
Yellow
Recommended Uses For Product
work
Item Highlight
Sandy Nitrile Coated, Superior Grip, Used for Woodworking, Glass Cutting, Construction, Cargo Handling, Gardening, Car Repair
Garment Size Country
United States
Other Special Features of the Product
Durable
Reusability
Reusable
Is Waterproof
False
Glove Or Mitt
glove
Sleeve Length Description
Sleeveless

3. Schwer A6 12-pack: grip-first for oily work

Schwer 12 Pairs A6 Cut Resistant Work Gloves, Reinforced Thumb, CR3028, L3 · Best Grip for Greasy Work

Verdict: For greasy prep or parts handling: sandy nitrile palm on 12 pairs rated ANSI A6, over 3000 grams of cutting load.

  • nitrile Palm Material
  • coated with added grip Palm Style
  • Regular Fit Type
  • not stated Is Waterproof

Best for Oily or wet handling where grip matters as much as cut level.

Skip it if Skip it if you handle blades routinely; step up to the Schwer A7 or ProGuard.

Pros 4
  • ANSI A6 on 12 pairs
  • Sandy nitrile palm for oily grip
  • 0.08 in thickness stated
  • Reinforced thumb
Cons 3
  • Waterproofing not stated
  • One level below the Schwer A7
  • Higher-priced in this set

Against the next pick: It beats the Schwer CR3088 on palm grip (sandy nitrile vs PU) and matches its 0.08 in thickness.

Not stated on the listing: glove construction, apparel fabric stretch, closure type. Also sold as: 1 pair / Grey A4 / Large, 1 pair / Grey A5 / Large, 240 pairs / Grey A5 / Large, 1 pair / Grey A4 / Medium.

This one sits a level under the A7 with the same sandy nitrile coating and reinforced thumb. Lower protection, same grip story.

Thickness is listed at 0.08 in, matching the Air-Skin, which is useful for anyone weighing dexterity. Washing instructions are precise: warm water and short low-heat tumble cycles.

Gaps remain. Construction, stretch and waterproofing are not stated, and the listing also points to A4 and A5 grey variants, so check the cut level before you add to cart.

Full listing specifications
Included Components
12 pairs glvoes
Warranty Description
LIMITED LIFETIME WARRANTY - If you’re not happy with your Schwer product, please contact us within 30 days of receiving it at sales@schwergloves.com to return it for free for a replacement product. Each Schwer product is warranted to be free of defects in material and workmanship for as long as the
Material
Nitrile
Material Features
Cut-resistant, Abrasion-resistant
Palm Material
nitrile
Palm Style
coated with added grip
Fabric Type
HPPE+Steel+Polyester, Spandex
Product Care Instructions
Hand or machine wash in warm water not exceeding 160°F (71°C), tumble dry for 10-15 minutes, not exceeding 150°F (67°C)
Size
Large
Item Thickness
0.2 centimeters

4. Schwer CR3088 12-pack: mid-priced PU option

Schwer 12 Pairs A4/A5/A6 Cut Resistant Gloves, Non PFAS CR3088, L4 · Best Mid-Priced Pack

Verdict: For warehouses and general handling: 12 pairs with a PU palm and a non-PFAS, non-fiberglass build, mid-priced in this set.

  • Polyurethane Palm Material
  • Coated Palm Palm Style
  • Regular Fit Type
  • False Is Waterproof

Best for Warehouse and general handling teams on a middle budget.

Skip it if Skip it if you need a clearly stated level; the Schwer A6 lists one.

Pros 3
  • Mid-priced 12-pack
  • Non-PFAS, non-fiberglass
  • 0.08 in thickness, thinnest stated
Cons 3
  • Cut level unclear between title and bullets
  • No fabric stretch listed
  • PU palm, not the sandy nitrile of the A6

Against the next pick: It is mid-priced where the Air-Skin is higher-priced, but the Air-Skin's 18-gauge liner targets finer work at the same 0.08 in.

Also sold as: 1 pair / Grey A4 / Large, 1 pair / Grey A5 / Large, 240 pairs / Grey A5 / Large, 1 pair / Grey A4 / Medium.

The cut level is muddled. The title says A4/A5/A6 while a feature bullet says ANSI Cut Level 5. Confirm the variant before ordering.

PU coating is thinner-feeling than sandy nitrile but usually less grippy in heavy oil; the listing claims secure grip in wet or oily conditions. At 1.85 lb for the pack it is the heaviest stated weight here, which reflects 12 pairs, not one glove.

Stretch is listed as none. Short.

Full listing specifications
Item Weight
0.84 kg
Included Components
12 pairs glvoes
Warranty Description
LIMITED LIFETIME WARRANTY - If you’re not happy with your Schwer product, please contact us within 30 days of receiving it at sales@schwergloves.com to return it for free for a replacement product. Each Schwer product is warranted to be free of defects in material and workmanship for as long as the
Material
Nitrile
Material Features
Durable, Abrasion Resistant, Cut-Resistant
Glove Construction
Dipped
Glove Liner Material
HPPE/Polyester/Spandex
Palm Material
Polyurethane
Palm Style
Coated Palm
Apparel Fabric Stretch
No Stretch

5. Schwer Air-Skin: thin enough for small parts

Schwer 12 Pairs Air-Skin A4 Cut Resistant Work Gloves, PU Coated, AR3600, L5 · Best for Dexterity

Verdict: For precision assembly and fine tasks: an 18-gauge liner with ANSI A4 and five-finger touchscreen.

  • PU Palm Material
  • coated with added grip Palm Style
  • Regular Fit Type
  • False Is Waterproof

Best for Electronics, assembly and detailed woodwork.

Skip it if Skip it if you handle knives or glass edges; choose the Schwer A7 instead.

Pros 3
  • 18-gauge liner, finest in this set
  • Free of PFAS, fiberglass, latex
  • Five-finger touchscreen
Cons 3
  • ANSI A4 only
  • Not waterproof
  • Construction type not stated

Against the next pick: It is thinner than the COOLJOB, 0.08 in against 0.25 in, but the COOLJOB lists waterproofing it lacks.

Not stated on the listing: glove construction, apparel fabric stretch. Also sold as: Blue / Small / 1 Pair, Blue / Small / 240 Pairs, Blue / Medium / 120 Pairs, Blue / X-Large / 1 Pair.

The finest knit here. Schwer says it is up to 50% lighter than typical A4 gloves, aimed at screws, small parts and inspection.

The price of that feel is protection: A4 is well below the ProGuard’s A9, so it is wrong for blades or sheet glass. It is also higher-priced in this set.

Material claims

The brand states it is free of PFAS, fiberglass and latex. Construction and stretch go unstated, and it is not waterproof.

Full listing specifications
Included Components
12 Pairs of Gloves
Warranty Description
LIMITED LIFETIME WARRANTY - If you’re not happy with your Schwer product, please contact us within 30 days of receiving it at sales@schwergloves.com to return it for free for a replacement product. Each Schwer product is warranted to be free of defects in material and workmanship for as long as the
Material
HPPE, Metal Wire, Polyester, Spandex, PU
Material Features
cut-resistant
Palm Material
PU
Palm Style
coated with added grip
Apparel Fabric Weight Class
Lightweight
Fabric Type
HPPE, Metal Wire, Polyester, Spandex, PU
Size
Large
Item Thickness
0.2 centimeters

6. COOLJOB PU 12-pack: low-cost bulk option

COOLJOB 12/120 Pairs Cut Resistant Work Gloves PU Coating, ANSI A2 A4 A6 A96 · Best Budget Bulk

Verdict: For budget bulk buying: lower-priced in this set, sold in 12 or 120 pairs, with A2 to A9 variants.

  • Polyurethane Palm Material
  • Coated Palm Palm Style
  • Snug Fit Type
  • True Is Waterproof

Best for Light-duty bulk stock on a tight budget.

Skip it if Skip it if you want dexterity; the Schwer Air-Skin is a third as thick.

Pros 3
  • Lower-priced in this set
  • 12 or 120 pair options
  • Ambidextrous, wing thumb
Cons 3
  • Thickest stated at 0.25 in
  • Conflicting waterproof specs
  • One-month warranty

Against the next pick: It offers higher cut-level variants than the Klein Tools A1, but at 0.25 in it is far bulkier than the Klein's light knit.

Also sold as: Ansi A6 Cut Level / Xlarge (Pack of 12), Ansi A6 Cut Level / Large (Pack of 12), Ansi A2 Cut Level / Large (Pack of 12), Ansi A4 Cut Level / Small (Pack of 12).

The listing has no feature bullets, so the cut level of this variant is unclear; the description talks about A4. Pick the level carefully from the options.

At 0.25 in it is the thickest stated glove, roughly three times the Schwer packs. More bulk, less feel.

One spec contradicts another: it says waterproof yet also not water resistant. Treat water claims as unreliable. Warranty is one month, short next to Schwer’s limited lifetime offer.

Full listing specifications
Included Components
Gloves
Warranty Description
1 month
Size
Large (Pack of 12)
Item Dimensions
9.8 x 5.5 x 4.7 inches
Item Thickness
0.25 inches
Other Special Features of the Product
Cut Resistant
Reusability
Reusable
Is Waterproof
True
Hand Orientation
Ambidextrous
Water Resistance Level
Not Water Resistant

7. Klein Tools A1 knit: light chores only

Klein Tools 60582 A1 Cut-Resistant Work Gloves, X-Large, 2-Pair7 · Best Light-Duty Knit

Verdict: For everyday low-risk chores: a stretchy nylon-spandex knit at ANSI A1, the lowest cut level here.

  • Nitrile Palm Material
  • coated with added grip Palm Style
  • Regular Fit Type
  • True Is Waterproof

Best for Light maintenance and general chores.

Skip it if Skip it if any sharp edge is involved; the Schwer A6 is a far higher rating.

Pros 3
  • Lightest stated weight, 0.21 lb
  • High stretch, seamless cuff
  • Microfoam nitrile grip
Cons 3
  • ANSI A1, lowest in this set
  • Only 2 pairs
  • Thickness not stated

Against the next pick: It is lighter and stretchier than the COOLJOB, but the COOLJOB offers up to A9 variants against this glove's A1.

Not stated on the listing: fabric type. Also sold as: Small / 2-pair Pack, Large / 1-pair Pack, Medium / 2-pair Pack, Large / 2-pair Pack.

A1 is light protection, and Klein says so. Expect abrasion and tear resistance rather than blade defence.

What you gain is comfort: high stretch, a seamless knit cuff and microfoam nitrile grip for dry, oily and wet conditions. At 0.21 lb for the 2-pair pack it is the lightest stated weight.

Thickness is not stated, and the brand field is blank on the listing even though the title names Klein Tools.

Full listing specifications
Item Weight
3.36 ounces
Included Components
Knit Dipped Gloves, Cut Level A1, Touchscreen, X-Large, 2-Pair
Item Type Name
Work Gloves
Warranty Description
See Manufacturer Website
Material
Blend
Material Type Free
Alcohol Free
Material Features
Tear and Abrasion Resistant, Cut Resistant, Machine Washable, Latex-Free
Glove Construction
Knit, Seamless Knit
Palm Material
Nitrile
Palm Style
coated with added grip

Which pick is best for what

The table lists each glove’s best use, palm material, palm style and relative price band. Palm material matters most after cut level: nitrile for grease, PU for feel.

#ProductPalm MaterialPalm StyleFit Type
1NitrileCoated PalmOne Size Fits AllCheck price
2Nitrilecoated with added gripnot statedCheck price
3nitrilecoated with added gripRegularCheck price
4PolyurethaneCoated PalmRegularCheck price
5PUcoated with added gripRegularCheck price
6PolyurethaneCoated PalmSnugCheck price
7Nitrilecoated with added gripRegularCheck price

Decide on Cut Resistant Work Gloves the right way

Here is what each listing states about ratings and material claims, in its own terms.

Schwer ProGuard

  • Cut rating: stated, ANSI A9.
  • Material claims: stated, PFAS free and alcohol free.

Schwer A7 12-pack

  • Cut rating: stated, ANSI A7, over 4000 grams cutting load.
  • Material claims: not stated beyond reinforced with metal wire.

Schwer A6 12-pack

  • Cut rating: stated, ANSI Cut Level 6, over 3000 grams.
  • Material claims: not stated.

Schwer CR3088

  • Cut rating: stated, but inconsistent; title says A4/A5/A6, bullets say Level 5.
  • Material claims: stated, non PFAS and non fiberglass.

Schwer Air-Skin

  • Cut rating: stated, ANSI A4.
  • Material claims: stated, free from PFAS, fiberglass and latex.

COOLJOB PU

  • Cut rating: variants A2, A4, A6, A9 offered; this listing’s level is not clearly stated.
  • Material claims: not stated; fiberglass is listed in the material.

Klein Tools A1

  • Cut rating: stated, ANSI A1.
  • Material claims: stated, latex-free and alcohol free.

Why these picks

Nothing here was worn or handled. The ranking compares manufacturer listings side by side: stated ANSI level, cutting load, palm coating, liner gauge, thickness, pack size, warranty and material claims.

Specs cannot tell you how a glove fits your hand, how it feels after a long shift, or how long the coating lasts. Order a single pair to check size before buying a dozen.

7 listings were compared on palm material, palm style, fit type and is waterproof. No product was bought or physically handled: every figure is the manufacturer's listing value. Produced by Restaurant Operations Desk. Editorial responsibility: restaurantweekhawaii.com.

Still have questions about Cut Resistant Work Gloves?

Is the Schwer ProGuard worth it over the Schwer A7 12-pack?

Only if one person faces the worst hazards. The ProGuard is rated A9 and sold as a single pair. The A7 pack gives 12 pairs with a stated load above 4000 grams. For a crew rotating gloves through laundry, the A7 pack is the practical pick; for one person on sheet glass or blades, the ProGuard.

Which glove is best for fine, detailed work?

The Schwer Air-Skin. Its 18-gauge liner is the finest in this set and Schwer pitches it at small parts and electronics. The trade is a lower A4 rating, so keep it away from knives. The Klein Tools A1 is stretchier but protects far less.

Do I want a nitrile or PU palm?

For greasy or wet handling, the sandy nitrile palms on the Schwer A6, A7 and ProGuard are built for grip in oil. PU, on the Schwer CR3088, Air-Skin and COOLJOB, is the thinner coating option. If oil is constant, lean nitrile; if feel matters most, PU.

Is the COOLJOB pack a good budget choice?

For light-duty spares, yes. It is lower-priced in this set and comes in 12 or 120 pairs. But it is 0.25 in thick, about three times the Schwer packs, its waterproof specs contradict each other, and the warranty is one month. Choose the cut level variant with care.

Which size should I order?

Use each brand’s size chart; Schwer listings point to one directly. The ProGuard oddly lists one size fits all with a Large tag, and the COOLJOB lists a snug fit, so size up only if your chart reading falls between sizes. The Klein Tools knit has high stretch, which forgives more.

Where does that leave you?

If you handle blades, glass or sheet metal yourself, the Schwer ProGuard’s A9 rating makes it the call. Outfitting a team instead? The Schwer A7 12-pack gives a high rating across a dozen pairs. And if your hazards are only scrapes and splinters, cut gloves may be more glove than you need; a light knit like the Klein Tools A1 already covers that.

What changed
  • Published guide
  • Guide drafted

Read the full method.