Restaurant WeekHawaii

5 Gloves for Working in a Freezer: Which Fits Best? (2026)

As an Amazon Associate I earn from qualifying purchases. When you click a product link on Restaurant Week Hawaii and buy something on Amazon, Amazon pays us a small commission; the price you pay is the same. Learn more.

Pick gloves for freezer work by cold rating first, then moisture, then the hazards in your hands.

For the best gloves for working in a freezer, weigh three things in order. First, the stated temperature range: a glove that only says warm or winter tells you little about a walk-in at deep cold.

Second, moisture. Frost, condensation and wet cartons soak through some fabrics fast, so check whether the listing says waterproof, water resistant or neither.

Third, what your hands touch: blades, box edges, slick packaging. That sets the grip and cut protection you need. Last comes closure and fit, which decides whether you can still pick up small items.

Our top picks for Gloves For Working In A Freezer

Ergodyne Proflex 850 comes first because its listing states a temperature rating of -5°F to -20°F, the lowest range among these picks. If you handle wet product or blades, Schwer FreezeGuard-X adds a cut-resistance claim, and OriStout is the pick when waterproofing matters most at a lower price band.

Choose the right Gloves For Working In A Freezer

Run every pair through this checklist

  • Stated temperature range. A listed figure beats a vague warm claim; no figure means you are guessing.
  • Moisture rating. Waterproof, water resistant and not water resistant are three different outcomes in a damp room.
  • Cut resistance. Needed only if you handle blades or sharp edges; check the listed level.
  • Grip coating. Silicone, nitrile or latex palms matter when packaging is slick or frosted.
  • Closure. Hook and loop seals the cuff; pull-on is quicker but lets cold air in.
  • Dexterity. Thin insulation keeps finger control; loose fit costs some.
  • Size range. Other sizes exist for most picks, so confirm yours before ordering.

Where the listings fall short

Several listings skip hand orientation, material or waterproof status. Where a fact is missing, treat it as unknown rather than a yes.

Fit and feel cannot be judged from a spec sheet. A glove rated cold enough can still be too bulky for your task.

Which gloves for working in a freezer fits which buyer

Compare each Gloves For Working In A Freezer pick

1. Ergodyne ProFlex 850 insulated freezer gloves

Ergodyne Unisex Proflex 850 Insulated Freezer Gloves - Ansi/Isea 105-2016 A21 · Best Overall

Verdict: For cold-storage staff who need a stated freezer rating: -5°F to -20°F, insulated, silicone grip, reinforced thumb saddles.

  • not stated Item Weight
  • Nylon Material
  • Not Water Resistant Item weight not stated. Material not stated. Not Water Resistant. Closure type not stated.
  • Hook and Loop Closure Type

Best for Dry cold-storage shifts at deep-freeze temperatures

Skip it if You work in wet conditions; look at OriStout instead.

ProsCons
Stated range of -5°F to -20°F, the only freezer-specific rating hereListing says not water resistant
Silicone palm pattern and reinforced thumb saddles for gripNo cut rating stated
Item weight not stated

Against the next pick: LOCCEF lists no cut rating, while Superior Glove lists ANSI A3. Beats Schwer on a stated freezer range, but Schwer adds a cut rating Ergodyne does not list.

Also sold as: XX-Large / Black, X-Small / Black, Medium / Black, XX-Small / Black.

This is the only listing built around the freezer job itself. It names the product type as insulated freezer gloves and gives a temperature range, which no other pick does as plainly.

The trade-off is moisture. The listing states the gloves are not water resistant, so frost melt, condensation and wet cartons will soak through. Dry cold storage suits them; washdowns do not.

Neoprene cuffs and lightweight insulation are described as keeping dexterity for all-day use. The listing gives no cut rating and no item weight, so blade work needs a different pair. Other sizes exist if Large does not fit.

Full listing specifications

Specifications

Included Components1 pair of glovesItem Type NameInsulated Freezer GlovesWarranty DescriptionWe stand behind everything we make and guarantee our products to be free of defects in materials and workmanship to the original purchaser for the lifetime of the product. That said, damage, abuse, and/or normal wear are not covered.SizeLargeItem Dimensions13.75 x 5 x 3 inchesOther Special Features of the ProductInsulatedReusabilityReusableIs WaterproofFalseHand OrientationAmbidextrousWater Resistance LevelNot Water Resistant

2. Schwer FreezeGuard-X cut-resistant freezer gloves

Schwer FreezeGuard-X Winter Work Gloves for Men and Women, ANSI A9 Cut Resistant Gloves for Extreme Protection, Freezer Glove With Super Grip, Touchscreen, Thermal Insulated, PM3326-W (XL,1 Pair)2 · Best for Cut Protection

Verdict: For freezer staff who also handle blades or sharp edges: listed ANSI A9 cut resistance with an acrylic terry liner.

  • 0.1 kg Item Weight
  • HPPE, Polyester, Spandex… Material
  • Water Repellent Waterproof Water Resistance Level, Pull On Closure Type.
  • Hook and Loop Closure Type

Best for Meat, packaging or box-cutter work in cold rooms

Skip it if You need a stated freezer rating; choose Ergodyne.

ProsCons
Listed ANSI A9 cut resistance, higher than Superior Glove's A3No temperature rating stated
Nitrile foam coating for wet and greasy gripWater repellent only, not waterproof
Hook-and-loop closure with reinforced thumbLoose fit may cost dexterity

Against the next pick: Beats OriStout on cut resistance, but OriStout is listed waterproof and Schwer is not.

Not stated on the listing: hand orientation. Also sold as: 12 pairs / Winter Black A6 / Large, 1 pair / Yellow / XX-Large, 2 pairs / Winter Orange / Medium, 120 pairs / Black / Large.

Cut protection is the reason to pick this. The listing names an A9 level, HPPE and metal-wire yarn, and a nitrile foam coating for wet and greasy grip.

The catch is warmth. The listing calls it cold resistant and suggests refrigerated warehouses, but gives no temperature rating. Compare that with Ergodyne, which states a range.

Water repellent, not waterproof. Fit is listed as loose, and the closure is hook and loop. The listing also claims touchscreen use and PFAS-free material. Hand orientation is not stated.

Full listing specifications

Specifications

Item Weight0.1 kgSizeX-LargeColorWinter OrangeRecommended Uses For ProductOutdoor Work in Cold Weather, Refrigerated WarehousesOther Special Features of the ProductCold Resistant, Cut Resistant, Level 2 puncture prevention, PFAS FreeReusabilityReusableIs WaterproofFalseWater Resistance LevelWater RepellentThumb StyleReinforced ThumbGlove Or MittGlove

3. OriStout waterproof winter work gloves

OriStout Waterproof Winter Work Gloves for Men and Women3 · Best for Wet Work

Verdict: For wet cold-room jobs: listed waterproof with latex palm coating and a -4°F rating, in a lower-priced band.

  • 3.84 ounces Item Weight
  • Polyester Material
  • Waterproof Water Resistant Water Resistance Level, Pull On Closure Type.
  • Pull On Closure Type

Best for Wet, moderately cold storage work

Skip it if You need blade protection; see Schwer.

ProsCons
Listed waterproof, which Ergodyne is notRated only to -4°F
Latex palm coating for slippery gripHand orientation listed as Right
Lower-priced in this setNo cut rating stated

Against the next pick: Waterproof where LOCCEF is water resistant by name, but LOCCEF ships two pairs.

Also sold as: 2 Pairs / X-Large / Orange, 1 Pair / X-Large / Red, 2 Pairs / Small / Gray, 2 Pairs / X-Large / Gray.

Waterproofing is the deciding fact. The listing states waterproof, a latex coating and a layered build for refrigerated warehouses.

It does not mention freezers by name, and the -4°F rating is shallower than Ergodyne’s lower figure. Only a Right orientation is listed, so confirm how it fits both hands.

A polyester and acrylic terry liner adds warmth, and graphene in the palm dip supports touchscreens. No cut rating is stated. Other sizes and multi-pair packs exist.

Full listing specifications

Specifications

Item Weight3.84 ouncesSizeLargeItem Dimensions17.65 x 5.59 x 1.61 inchesOther Special Features of the ProductWaterproofReusabilityReusableIs WaterproofTrueHand OrientationRightWater Resistance LevelWaterproofThumb StyleWing ThumbGlove Or MittGlove

4. LOCCEF thermal freezer gloves, 2 pairs

2 Pairs Winter Work Gloves Men Women, Thermal Freezer Gloves4 · Best Two-Pair Pack

Verdict: For crews that rotate gloves: a pack of two, fleece-style insulation, rated below 32°F and listed for cold storage.

  • 0.22 kg Item Weight
  • Polyester, Acrylic… Material
  • Water Resistant Water Resistant Water Resistance Level, Pull On Closure Type.
  • Pull On Closure Type

Best for Shared crews needing spare pairs

Skip it if You need a deep-freeze rating; pick Ergodyne.

ProsCons
Two pairs in one packRating only below 32°F
Listed for cold storage activityWaterproof and water resistant labels conflict
Ambidextrous

Against the next pick: Heavier than Superior Glove's listed weight issue aside, it is warmer-rated on paper only loosely and lacks A3 cut protection.

Not stated on the listing: fit type. Also sold as: X-Large, XX-Large, Large (Pack of 2), Small (Pack of 2).

You get two pairs, so one can dry while you wear the other. That is the practical draw.

The temperature rating is only below 32°F, which is a freezing point, not a freezer figure. Ergodyne states far lower. The listing calls it waterproof in specs yet water resistant in level, so treat wet claims cautiously.

Wing thumb, pull-on, sleeveless cuff. A puncture rating is claimed in the description. The listing gives the weight as 0.22 kg.

Full listing specifications

Specifications

Item Weight0.22 kgSizeMedium (Pack of 2)Other Special Features of the ProductInsulatedReusabilityReusableIs WaterprooftrueHand OrientationAmbidextrousWater Resistance LevelWater ResistantThumb StyleWing ThumbGlove Or MittGloveProtective Glove Temperature RatingBelow 32°F

5. Superior Glove fleece-lined winter work gloves

Superior Glove Winter Work Gloves - Fleece-Lined with Black Tight Grip Palms (Cold Temperatures) Freezer Gloves - SNTAPVC5 · Best Light Cold Gloves

Verdict: For cooler rooms: fleece lining to -5°C (23°F) and ANSI A3 cut resistance with a palm coating that stays flexible.

  • unclear on listing Item Weight
  • Nylon Material
  • Water Resistant Water Resistance Level
  • Pull On Closure Type

Best for Chilled rooms with light cutting

Skip it if Your freezer runs below zero; choose Ergodyne.

ProsCons
Listed ANSI A3 cut resistanceOnly rated to 23°F
Palm coating stays flexible in coldNot waterproof
Ambidextrous, regular fitWeight in listing is an error

Against the next pick: Offers A3 cut protection where LOCCEF lists none, but LOCCEF's pack has two pairs.

Also sold as: Small (Pack of 1) / Red/Black, Large (Pack of 1) / Red/Black, X-Large (Pack of 1) / Red/Black.

That suits coolers and chilled rooms, not a true freezer.

Its strengths are A3 cut resistance and a palm coating said not to stiffen in cold. Water resistant, not waterproof.

The listed weight of 9.07 g is a listing error, so ignore it. Regular fit, pull-on, ambidextrous.

Full listing specifications

Specifications

Item Weight9.07 gSizeMedium (Pack of 1)Item Dimensions9.18 x 4.04 x 0.08 inchesOther Special Features of the ProductCold ResistantReusabilityReusableIs WaterproofFalseHand OrientationAmbidextrousWater Resistance LevelWater ResistantThumb StyleWing ThumbGlove Or MittGlove

Know this before you buy Gloves For Working In A Freezer

What each listing states

  • Schwer: states ANSI A9 cut resistance, level 2 puncture prevention and PFAS free; water repellent.
  • OriStout: states waterproof and a latex coating; mentions sustainability features without naming a certifier.
  • LOCCEF: states an ANSI 2 puncture rating and recycled content; the waterproof field and water resistance level disagree.
  • Superior Glove: states ANSI A3 cut resistance and water resistant.

Anything not listed above is not stated. Do not assume a mark the listing does not name.

The competition

  • SIMARI touchscreen winter gloves Not what the search asks for Ski-style liner gloves; the listing gives no temperature rating or water resistance and does not mention freezers.
  • Bruvoalon 3M Thinsulate winter gloves Not what the search asks for Built for running and commuting, and the listing says it is not for the coldest conditions.
  • HANDLANDY Thinsulate waterproof gloves Listing states too little and the listing gives no temperature rating or cut rating.

How this guide was researched

None of these gloves were handled. The ranking comes from reading each manufacturer’s listing and comparing temperature ratings, water claims, cut levels, closures and materials side by side.

Listings cannot tell you fit, feel, warmth over a full shift or how long the coating lasts. Where a listing contains an obvious error, such as one item weight, it is flagged and not used.

8 listings were compared on item weight, material, water resistance level and closure type. 3 were set aside (2 not what the search asks for and 1 listing states too little). No product was bought or physically handled: every figure is the manufacturer's listing value, and 1 listed value that looked wrong is flagged in the text. Produced by Restaurant Operations Desk. Editorial responsibility: restaurantweekhawaii.com.

Your buying questions

Which glove suits a walk-in freezer below zero?

Ergodyne ProFlex 850 is the one to start with. Its listing states -5°F to -20°F, the only freezer-specific range here. OriStout stops at -4°F and Superior Glove at 23°F, so neither is a match for deep cold.

Is Schwer worth it over Ergodyne?

Only if you cut things. Schwer lists ANSI A9 cut resistance and Ergodyne lists none. Ergodyne states a freezer range and Schwer does not, so choose by whether blades or cold is the bigger risk.

Which pick handles wet conditions?

OriStout is listed as waterproof with a latex palm coating. Ergodyne’s listing says not water resistant, and Superior Glove is water resistant only. For frost melt and washdowns, OriStout fits better.

Is the LOCCEF two-pair pack a good idea?

It helps if gloves get damp and need drying between shifts.

Can ski or running gloves work in a freezer?

The listings are not encouraging. SIMARI is a ski-liner style with no stated rating, and Bruvoalon says it is not for the coldest conditions. The five picks here are better matches for freezer work.

The right Gloves For Working In A Freezer for you

Choose Ergodyne for dry deep-freeze shifts, Schwer when blades are involved, and OriStout when things get wet. LOCCEF and Superior Glove fit lighter cold jobs.

Editor’s note: this guide was first published in 2026 and reflects the product pages as they stood then.

What changed
  • Published guide
  • Guide drafted

Read the full method.